Secure Protocol; Lan Interface - Kyocera ECOSYS M3040idn Operation Manual

Setup and Registration (System Menu) > System Menu
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
IPSec
Item
IPSec
*1 The setting will be changed after restarting the device or the network for the machine.

Secure Protocol

Item
SSL
IPP Security
HTTP Security
LDAP Security (Ext. Address
Book)
LDAP Security (User Property)
SMTP Security
POP3 Security (User 1)
POP3 Security (User 2)
POP3 Security (User 3)
*1 LDAP must be set to [On] in

LAN Interface

Item
LAN Interface
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Restart Network
Item
Restart Network
Make this setting when you use IPSec.
Value: Off, On
Select whether or not to use SSL.
Value: Off, On
Select the IPP security level. This setup is available when SSL is [On].
Value: IPP/IPP over SSL, IPPoverSSL only
Select the HTTP security level. This setup is available when SSL is [On].
Value: HTTP/HTTPS, HTTPS Only
Select the type of encryption according to the type of security employed by the LDAP server.
This setup is available when SSL is [On].
Value: Off, SSL/TLS, STARTTLS
Select the communication protocol according to the type of security employed by the SMTP
server. This setup is available when SSL is [On].
Value: Off, SSL/TLS, STARTTLS
Select the communication protocol according to the type of security employed by the POP3
server. This setup is available when POP3 is [On].
Value: Off, SSL/TLS, STARTTLS
Protocol Detail on page 8-29.
Specify the settings for the LAN interface to be used.
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T
Restarts the network.
Description
*1
Description
*1
Description
Description
8-31