Using The Settings In The Visualrf > Setup Page - Dell PowerConnect W-Airwave User Manual

Table 138 Edit Icons and Descriptions (Continued)
Operation
Set Origin
Add Deployed Device
Add Planned Device
Delete Planned
Devices/Delete
Deployed Device
Delete Surveys
Figure 194
window is the Search box. In the top right corner is the zoom control. You can also zoom by using Ctrl + your
mouse wheel as well as the + and - keys. In the bottom right corner are navigation tools related to network,
campus, and building.
Figure 194 On-Screen Navigation Options
Using the Settings in the VisualRF > Setup Page
The VisualRF > Setup page, illustrated in
reconfigure these settings very carefully because these settings can impact your server's performance as well as
your location accuracy.
NOTE: Selecting Save will cause VisualRF to restart, disrupting or delaying the usability for up to 5 minutes.
262 | Using VisualRF
Description
Set Orientation for proper vertical floor plan alignment.
Provision APs onto a floor plan (APs monitored by AMP).
Manually plan APs onto a floor plan (APs not monitored by AMP).
Remove all specified devices on a floor plan.
Remove all surveys (rogue and client) on floor plan.
shows additional navigation controls when viewing floor plans. In the bottom left corner of the
Figure 195, configures advanced settings for VisualRF. Please
Dell PowerConnect W-AirWave 7.4 | User Guide