Visualrf And Channel Utilization; Configuring Channel Utilization Triggers - Dell PowerConnect W-Airwave Manual

See the Dell PowerConnect W-AirWave 7.3 User Guide in Home > Documentation for more information on the
data displayed in the Radio Statistics page for these devices.

VisualRF and Channel Utilization

To view how channel utilization is impacting an area within a building, follow these steps:
1. Navigate to a floor plan by clicking on the thumbnail on a device's APs/Devices > Monitor page or navigating
to VisualRF > Floor Plans page.
2. Select the Overlays menu.
3. Select Utilization overlay.
4. Select Current or Maximum (over last 24 hours).
5. Select total (default), receive, transmit, or interference (see Figure 16).
Figure 16 Channel Utilization in VisualRF (Interference)

Configuring Channel Utilization Triggers

1. Navigate to System > Triggers and select Add.
2. Select Channel Utilization from the Type drop-down menu as seen on Figure 17:
Figure 17 Channel Utilization Trigger
Dell PowerConnect W-AirWave | Best Practices Guide Dell PowerConnect W-Specific Capabilities in AMP | 31