Dell PowerConnect W-Airwave User Manual page 215

Table 122 Home > User Info Fields and Descriptions
Field
Top Header Stats
Filter Level For Rogue Count
Customize Header Columns
Stats
Severe Alert Threshold
Include Device Types
Search Preferences
Customize Search
Display Preferences
Default Number of Records per
List
Reset List Preferences
Customize Columns for Other
Roles
Console Refresh Rate
Idle Timeout
(5 mins to 240 mins)
Perform the following steps to configure your own user account with the Home > User Info page:
1. In the User Information section, enter the following information:
Name—Enter the ID by which you log into and operate in AirWave.

Email Address—Enter the email address to be used for alerts, triggers, and additional AirWave functions

that support an email address.
Phone—Enter the area code and phone number, if desired.

Notes—Enter any additional text-based information that helps other AirWave users or administrators to

understand the functions, roles, or other rights of the user being created.
Dell PowerConnect W-AirWave 7.4 | User Guide
Description
Specifies the minimum classification that will cause a device to be included in the rogue
count header information. More about the classifications can be found in
Classification with WMS Offload" on page
Enables/disables the ability to control which statistics hyperlinks (also known as Top
Header Stats) are displayed at the top of every AirWave screen.
Select the specific data you would like to see in the Top Header Stats. Refer to
Section" on page 22.
Note: This field only appears if you selected Yes in the previous field.
Configures the minimum severity of an alert to be included in the Severe Alerts count. See
"Setting Severe Alert Warning Behavior" on page 34
Note: The severe alerts count header info will only be displayed if 'Severe Alerts' is
selected in the Stats section above.
Note: This field only appears if you selected Yes in the Customize Header Columns field.
Configures the types of devices that should be included in the header stats. If a device
type is not selected then it will not be included in the header stats.
Note: This field only appears if you selected Yes in Customize Header Columns.
Set to No by default; when set to Yes, you can select which search categories to display
when "Full" search results are returned.
Defines the number of rows to appear in any list by default. If a row count is manually set,
it will override the default setting.
Reset all list preferences including number of records per list, column order and hidden
column information.
Allows admin users to determine the columns that should be displayed and the order they
should be displayed for specific user roles. To customize lists for other users, navigate to
that list and select Choose Columns for roles above the list. Make the desired column
changes; select the roles to update and Save.
The frequency in which lists and charts automatically refresh on a page.
Number of minutes of idle time until AMP automatically ends the user session. This
setting only the logged-in user of this AMP. The default is 60 minutes. To set the max idle
timeout for all users of this AMP, see
page 48.
172.
for details.
"Setting Up Login Configuration Options" on
Performing Daily Administration in AirWave | 215
"Controller
"Status