This chapter explains how to set up and fine-tune VisualRF, and includes the following topics:
"Using the Settings in the VisualRF > Setup Page" on page 13
"VisualRF Resource Utilization" on page 16
"Configuring QuickView Personal Preferences" on page 17
"Increasing Location Accuracy" on page 18
"Fine-Tuning Location Service in VisualRF > Setup" on page 23
"Using QuickView to Assess RF Environments" on page 26
Using the Settings in the VisualRF > Setup Page
The VisualRF > Setup page, illustrated in
reconfigure these settings very carefully because these settings can impact your server's performance as well as
your location accuracy.
NOTE: Selecting Save will cause VisualRF to restart, disrupting or delaying the usability for up to 5 minutes.
Figure 4 The VisualRF Setup Page
Dell PowerConnect W AirWave 7.2 | VisualRF User Guide
Chapter 2
Setting Up and Tuning VisualRF
Figure
4, configures advanced settings for VisualRF. Please
Setting Up and Tuning VisualRF | 13