Planning And Provisioning; Creating A New Campus - Dell PowerConnect W-Airwave User Manual

Figure 218 Network Tree View - Floor highlighted
3. Use the arrows to drill down into the folders to select the Campus, Building, or Floor. Select the folder or floor
plan icon to open the view you have selected. The Network Tree View window will remain on the screen until
you close it.
NOTE: If you prefer not to use background maps for your campus or building placements, click a background and select Auto-
Arrange to move the campuses, buildings from their placements into an alphabetically-sorted list.

Planning and Provisioning

VisualRF provides the capability to plan campuses, buildings, floors, and access points prior to the actual access
point deployment. The following procedure describes the workflow:
"Creating a New Campus" on page 279

"Creating a New Building in a Campus" on page 280

"Importing a Floor Plan" on page 281

"Editing a Floor Plan Image" on page 282

"Provisioning Existing Access Points onto the Floor Plan" on page 285

"Automatically Provisioning APs onto a Floor Plan" on page 286

"Tweaking a Planning Region" on page 287

"Printing a Bill of Materials Report" on page 288


Creating a New Campus

Floors are associated with a building and buildings are associated with a campus. In order to create a new floor,
you must first create a campus and building.
To create and place your campus, follow these steps:
1. Navigate to VisualRF > Floor Plans.
2. Select the Add Campus button, located above the floor plan on the top left. The Create New Campus
window, illustrated in
Dell PowerConnect W-AirWave 7.4 | User Guide
Figure 219, appears.
Using VisualRF | 279