Dell PowerConnect W-Airwave User Manual page 37

validates the Folder and Group to ensure that both settings have been set to valid dropdown options.
describes the settings and default values in this section.
Table 9 AMP Setup > General > Automatic Authorization Fields and Default Values
Setting
Add New Controllers
and Autonomous
Devices Location
Add New Thin APs
Location
3. On the AMP Setup > General page, locate the Top Header section to select the Top Header Stats to be
displayed at the top of the interface. For more detailed information about each option, refer to
page
4. On the AMP Setup > General page, locate the Search Preferences section. Select the search categories to
include in a "Full" search of AMP such APs/devices, clients (connected and/or historical), VPN sessions
(connected and/or historical), rogues, rogue clients, tags, folders, and groups. All are selected by default. Per-
user search preferences can be set in the Home > User Info page; refer to
5. On the AMP Setup > General page, locate the Home Overview Preferences section.
settings and default values in this section.
Table 10 AMP Setup > General > Home Overview Preferences Fields and Default Values
Setting
Configure Channel
Busy Threshold
Channel Busy
Threshold (%)
6. On the AMP Setup > General page, locate the Display section and select the Group tabs and options to
appear by default in new device groups.
NOTE: Changes to this section apply across all of AirWave. These changes affect all users and all new device groups.
Dell PowerConnect W-AirWave 7.4 | User Guide
Default Description
New Globally add new controllers and autonomous devices to:
Device

List



NOTE: This setting can be overridden in Groups > Basic.
New Globally add new thin APs to:
Device

List



NOTE: This setting can be overridden in Groups > Basic.
22.
Default Description
Yes Whether you want to configure the threshold at which a channel is considered to be
busy at the Top Folders By Radio Channel Usage Overview widget.
10 The threshold percent at which the radio channel is considered busier than normal.
The New Devices list (located in APs/Devices > New).
The same folder and group as the discovering device.
The same group and folder of their closest IP neighbor on the same subnet.
Choose a group and folder. If you select this option, enter the folder/group in the
Auto Authorization Group and Auto Authorization Folder fields that display.
The New Devices list.
The same folder and group as the discovering device.
The same group and folder of their closest IP neighbor on the same subnet.
Choose a group and folder. If you select this option, enter the folder/group in the
Auto Authorization Group and Auto Authorization Folder fields that display.
Table 5 on
"Customized Search" on
Table 11 describes the
Configuring AMP | 37
Table 9
page 34.