Configuring Acs Servers - Dell PowerConnect W-Airwave User Manual

What Next?
Go to additional tabs in the AMP Setup section to continue additional setup configurations.

Complete the required configurations in this chapter before proceeding. AirWave support remains available to

you for any phase of AirWave installation.

Configuring ACS Servers

This is an optional configuration. The AMP Setup > ACS page allows AirWave to poll one or more Cisco ACS
servers for wireless username information. When you specify an ACS server, AirWave gathers information about
your wireless users.
Perform these steps to configure ACS servers:
1. Go to the
Figure 32 AMP Setup > ACS Page Illustration
2. Select Add to create a new ACS server, or select a pencil icon to edit an existing server. To delete an ACS
server, select that server and select Delete. When selecting Add or edit, the Details page appears, as
illustrated in
Figure 33 AMP Setup > ACS > Add/Edit Details Page Illustration
3. Complete the settings on AMP Setup > ACS > Add/Edit Details.
Table 36 AMP Setup > ACS > Add/Edit Details Fields and Default Values
Field
IP/Hostname
Protocol
Port
Username
Password
Polling Period
Dell PowerConnect W-AirWave 7.4 | User Guide
Setup > ACS page. This page displays current ACS setup, as illustrated in
AMP
Figure 33.
Default Description
None Sets the DNS name or the IP address of the ACS Server.
HTTP Launches a drop-down menu specifying the protocol AirWave uses when it polls the ACS server.
2002 Sets the port through which AirWave communicates with the ACS. AirWave generally
communicates via SNMP traps on port 162.
None Sets the Username of the account AirWave uses to poll the ACS server.
None Sets the password of the account AirWave uses to poll the ACS server.
10 min Launches a drop-down menu that specifies how frequently AirWave polls the ACS server for
username information.
Figure
Table 36 describes these fields:
Configuring AMP | 63
32.