Dell PowerConnect W-Airwave User Manual page 170

Figure 118 RAPIDS > Setup Page Illustration
Table 94 RAPIDS > Setup > Basic Configuration Fields
Field
ARP IP Match Timeout
RAPIDS Export Threshold
Wired-to-Wireless MAC
Address Correlation
Wireless BSSID Correlation
Delete Rogues not detected
for (0-14 days, zero disables):
Automatically OS scan rogue
devices
Table 95 RAPIDS > Setup > Classification Options Fields
Field
Acknowledge Rogues by
Default
Manually Classifying Rogues
Automatically Acknowledges
them
170 | Using RAPIDS and Rogue Classification
Default Description
24 If you have routers and switches on the AMP, and it's scanning them for ARP
tables, this can assign a rogue IP address information. This timeout specifies
how recent that information needs to be for the IP address to be considered
valid. Note that the default ARP poll period is long (several hours).
Suspected Exported rogues will be sent to VisualRF for location calculation.
Rogue
4 Discovered BSSIDs and LAN MAC addresses which are within this bitmask will
be combined into one device. 4 requires all but the last digit match
(aa:bb:cc:dd:ee:fX). 8 requires all but the last two digits match
(aa:bb:cc:dd:ee:XX).
4 Similar BSSIDs will be combined into one device when they fall within this
bitmask. Setting this value too high may result in identifying two different
physical devices as the same rogue. Note: When you change this value,
RAPIDS will not immediately combine (or un-combine) rogue records. Changes
will occur during subsequent processing of discovery events.
0 This value cannot be larger than the rogue discovery event expiration (14)
configured on the AMP Setup page, unless that value is set to 0.
No Whether to scan the operating system of rogues. Enabling this feature will
cause RAPIDS to perform an OS scan when it gets in IP address for a rogue
device. The OS scan will be run when a rogue gets an IP address for the first
time or if the IP address changes.
Default Description
No Sets RAPIDS to acknowledge rogue devices upon initial detection, prior to their
classification.
Yes Defines whether acknowledgement happens automatically whenever a rogue
device receives a manual classification.
Dell PowerConnect W-AirWave 7.4 | User Guide