See the Dell PowerConnect W-AirWave User Guide in Home > Documentation for more information on the data
displayed in the Radio Statistics page for these devices.
VisualRF and Channel Utilization
To view how channel utilization is impacting an area within a building, follow these steps:
1. Navigate to a floor plan by clicking on the thumbnail on a device's APs/Devices > Monitor page or navigating
to VisualRF > Floor Plans page.
2. Select the Overlays menu.
3. Select Utilization overlay.
4. Select Current or Maximum (over last 24 hours).
5. Select total (default), receive, transmit, or interference (see
Figure
17).
Figure 17
Channel Utilization in VisualRF (Interference)
Configuring Channel Utilization Triggers
1. Navigate to System > Triggers and select Add.
2. Select Channel Utilization from the Type drop-down menu as seen on
Figure
18:
Dell PowerConnect W-AirWave 7.5 | Best Practices Guide
Dell PowerConnect W-Series Specific Capabilities in AirWave | 25