Setting Triggers For Radius Authentication Issues; Setting Triggers For Ids Events - Dell PowerConnect W-Airwave User Manual

Setting Triggers for RADIUS Authentication Issues

Perform the following steps to configure RADIUS-related triggers.
a. Choose a trigger type from the RADIUS Authentication Issues list in the drop-down Type menu.
112
Table 112 RADIUS Authentication Trigger Types and Condition Settings
Option
Client RADIUS
Authentication Issues
Device RADIUS
Authentication Issues
Total RADIUS
Authentication Issues
b. Repeat this procedure for as many triggers and conditions as desired. Refer to the start of
Triggers" on page 187

Setting Triggers for IDS Events

Perform the following steps to configure Intrusion Detection System (IDS)-related triggers.
a. Choose the Device IDS Events trigger type from the drop-down Type menu. See
describes condition settings for this trigger
Table 113 Device IDS Events Authentication Trigger Types and Condition Settings
IDS Trigger
Options
Device IDS Events
Rogue Device
Classified
Client on Rogue
AP
b. Repeat this procedure for as many triggers and conditions as desired. Refer to the start of
Triggers" on page 187
Dell PowerConnect W-AirWave 7.4 | User Guide
itemizes and describes the condition settings for each RADIUS Authentication trigger
Description
This trigger type sets the threshold for the maximum number of failures before an alert is issued for a
user. Select Add New Trigger Condition to specify the count characteristics that trigger an alert. The
Option, Condition, and Value fields allow you to define the numeric value of user issues.
This trigger type sets the threshold for the maximum number of failures before an alert is issued for a
device. The Option, Condition, and Value fields allow you to define the numeric value of user issues.
This trigger sets the threshold for the maximum number of failures before an alert is issued for both
users and devices.
to create a new trigger.
Description
This trigger type is based on the number of IDS events has exceeded the threshold specified as Count in
the Condition within the period of time specified in seconds in Duration. Alerts can also be generated for
traps based on name, category or severity. Select Add New Trigger Condition to specify the count
characteristics that trigger an IDS alert.
This trigger type indicates that a device has been discovered with the specified Rogue Score. Ad-hoc
devices can be excluded automatically from this trigger by selecting Yes. See
Classification" on page 167
Once you choose this trigger type, select Add New Trigger Condition to create one or more conditions. A
condition for this trigger enables you to specify the nature of the rogue device in multiple ways.
This trigger type indicates that a client has associated to a rogue AP. Available conditions include rogue
classification, and whether the client is valid.
to create a new trigger.
type.
for more information on score definitions and discovery methods.
Figure
"Using RAPIDS and Rogue
Performing Daily Administration in AirWave | 193
Table
type.
"Creating New
133. Table 113
"Creating New