Dell PowerConnect W-Airwave User Manual page 200

Figure 138 AMP Setup > Users Page Illustration
3. The newly created login information should be provided to the person or people who will be responsible for
creating guest access users.
4. The next step in creating a guest access user is to navigate to the Clients > Guest Users tab. From this tab,
you can add new guest users, you can edit existing users, and you can repair guest user errors.
This page displays a list of guest users and data, to include the expiration date, the SSID (for Cisco WLC) and
other information.
Figure 139 Clients > Guest Users Page Illustration
Table 117 Clients > Guest Users Fields
Field
Repair Guest User
Errors
Add New Guest User
Username
Enabled
Email
Company Name
Sponsor Name
Expiration
WLAN Profile
200 | Performing Daily Administration in AirWave
Figure 139 illustrates this page and
Description
Sets AirWave to attempt to push the guest user again in an attempt to repair any errors in the Status
column.
Adds a new guest user to a controller via AirWave.
Randomly generates a user name for privacy protection. This name appears on the Guest User detail
page.
Enables or disables the user status. Set the status of the guest user as active (enabled) or expired
(disabled).
Displays the optional email address of the user.
Displays the optional company name for the user.
Displays the name of the sponsor for the guest user. This setting is optional.
Displays the date the guest user's access is to expire.
Sets the SSID that the guest user can access. This setting applies to Cisco WLC only.
Table 117 describes the information.
Dell PowerConnect W-AirWave 7.4 | User Guide