Supporting Vpn Users With The Clients > Vpn Sessions Page - Dell PowerConnect W-Airwave User Manual

Table 117 Clients > Guest Users Fields (Continued)
Field
Status
Guest users associated to the wireless network appear on the same list as other wireless users, but are
identified as guest users in the Guest User column. The Client Detail page for a guest user also contains a box
with the same guest information that appears for each user on the Clients > Guest Users list.
NOTE: The Enabled, Sponsor Name, WLAN Profile, and Status columns can be filtered
5. To add a new guest user, select Add, and complete the fields illustrated in
describes most fields. The first three fields are required, and the remaining fields are optional.
Figure 140 Clients > Guest Users > Add New Guest User Page Illustration
To make the Username or Password anonymous and to increase security, complete these fields then select
Generate. The anonymous and secure Username and Password appear in the respective fields.
6. Select Add to complete the new guest user, or select Cancel to back out of new user creation. The Clients >
Guest Users page appears and displays results, as applicable.
Supporting VPN Users with the Clients > VPN Sessions Page
The Clients > VPN Sessions page shows active VPN Sessions along with device type and HTTP fingerprinting
information.
Dell PowerConnect W-AirWave 7.4 | User Guide
Description
Reports current status by the controller. If error messages appear in this column, select the user with
the checkbox at left, and select the Repair guest user errors button.
using the funnel icon (
Figure 140. Table 117
Performing Daily Administration in AirWave | 201
).
above