Defining Graph Display Preferences; Customizing The Dashboard - Dell PowerConnect W-Airwave User Manual

Defining Graph Display Preferences

Many of the graphs in AirWave are Flash-based which allows you adjust the graph settings attributes, as shown in
Figure 11.
Figure 11 Interactive Graphs on the Home > Overview Page
This Flash-enabled GUI allows for custom settings and adjustments, as follows:
Drag the slider at the bottom of the screen to move the scope of the graph between one year ago and the

current time.
Drag the slider between graphs to change the relative sizes of each.

Deselect checkboxes to change the data displayed on each graph. The button with green arrows refreshes data

on the graph.
The Show All link displays all of the available checkboxes supporting the Flash graphs.

Once a change to the slider bars or to the display boxes has been made, the same change can be applied to all

other Flash graphs with an apply button (appears on mouse-over only).
For non-Flash graphs, select the graph to open a popup window that shows historical data.

A non-Flash version of the AirWave user page is available if desired; instead of Flash it uses the RRD graphs that
were used in earlier versions of AirWave. Contact AirWave support for more information on activating this
feature in the AirWave database.

Customizing the Dashboard

You can rearrange or remove widgets appearing on the Home > Overview dashboard by selecting the Customize
link to the right of this window, as shown in
Figure 12 Customize Button on the Home > Overview Page
The Customize workspace that appears is shown in
32 | Configuring AMP
Figure 12.
Figure 13.
Dell PowerConnect W-AirWave 7.4 | User Guide