Printer Settings Report - Dell 5100cn Color Laser Printer User Manual

Host I/F
Job Submitted Time Displays the date the print job was submitted.
Printer Settings
Use the Printer Settings menu to display the printer settings report and to configure printer settings.
The following tabbed pages are displayed at the top of the Right Frame.

Printer Settings Report

The Printer Settings Report tab includes the Menu Settings page.
Menu Settings
Purpose:
To display the current settings of the operator panel menus.
Values:
Basic Settings Power Saver
Time
Error Alarm
Job Timeout
Panel
Language
Auto Log Print
ID Print
Text Print
Banner Sheet
Position
Banner Sheet
Input Tray
RAM Disk
Substitute Tray Displays whether or not to use another size paper when the paper that is loaded in
Parallel ECP
Settings
Adobe Protocol Displays PostScript communication protocol for each interface.
Network Adobe Protocol Displays PostScript communication protocol for each interface.
Settings
USB Settings Adobe Protocol Displays PostScript communication protocol for each interface.
Displays the status of the host interface.
Displays the amount of time before the printer enters power saver mode after it
finishes a print job.
Displays whether the printer sounds an alarm when an error occurs.
Displays specify the amount of time the printer waits to receive additional bytes of
data from the computer.
Displays the language of the text on the operator panel screen.
Displays whether the printer outputs logs automatically.
Displays a location where the user ID is printed.
Displays whether the printer outputs PDL data, which is not supported by the
printer, as text when the printer receives it.
Displays the position of banner sheet.
Displays the tray in which the banner sheet is loaded.
Displays whether to allocate memory to the RAM Disk file system for the Secure
Print and Proof Print features.
This item is only available when the 256 MB, or higher, optional memory card is
installed, and also when the optional hard disk is not installed.
the specified tray does not match the paper size settings for the current job.
Displays the ECP communication mode of the parallel interface.