2. Press
until Configure appears, and then press
3. Press
until Maintenance appears, and then press
4. Press
until Init NVRAM appears, and then press
5. The Are you sure? message appears on the operator panel. Press
6. Turn off the printer, and then on again.
Deleting NVRAM From Network Settings
You can initialize the IP address and network-related settings by deleting NVRAM from Network settings.
1. Press Menu.
2. Press
until Configure appears, and then press
3. Press
until Network appears, and then press
4. Press
until Init NVRAM appears, and then press
5. The Are you sure? message appears on the operator panel. Press
6. Turn off the printer, and then on again.
or
.
or
.
or
.
.
or
.
or
.
or
.
.