Printing From Linux - Dell 5100cn Color Laser Printer User Manual

2. Delete the filters registered with the system. Delete the filters registered during the installation using the lpfilter
command.
# lpfilter -f dell5100cn -x (for Dell Laser Printer 5100cn)
# lpfilter -f download5100cn -x
# lpfilter -f postio5100cn -x
# lpfilter -f posttxt5100cn -x
3. Delete the symbolic files required to call up the filter.
Delete the following files from /usr/lib/lp/postscript.
dellposttxt5100cn
dellpostps5100cn
dellbinpath5100cn
4. Delete the interface program files of Selected printer type name from /usr/lib/lp/model.
Please also delete the interface program files of Selected printer name from /etc/lp/interfaces.
5. Delete all the directories that contain the UX filters and the files in these directories created during the installation.
The following directories must be deleted.
/usr/local/dellbin5100cn
6. Delete the filter description files. Delete the following files from /etc/lp/fd.
Filter description files for various printers.
dell5100cn.fd (for Dell Laser Printer 5100cn)
download5100cn.fd
postio5100cn.fd
posttxt5100cn.fd
HP-UX
1. Delete the printer that was registered with the system. Use the sam command to delete the printer set up during
the installation.
# sam
2. Delete all the directories that contain the UX filters and the files in these directories created during the installation.
The following directories must be deleted.
/usr/local/dellbin5100cn (directory specified during the installation)
Printing and Using the Utilities
Printing (Linux)
This section provides information on printing with the filter.
To print, specify the printer registered with /etc/printcap as the output destination.

Printing From Linux

To print to the default printer:
If the printer is registered as the default printer, the name of the printer can be shortened and specified as shown in
the following example.
% lpr filename