Removing Options - Dell 5100cn Color Laser Printer User Manual

Removing Options

If the printer location needs to change or the printer and print media handling options need to be shipped to a new
location, all print media handling options must be removed from the printer. For shipping, pack the printer and print
media handling options securely to avoid damage.
Removing Optional Tray Modules
Removing the Optional Memory Card
Removing the Optional Multi Protocol Card
Removing the Optional Hard Drive
Removing Optional Tray Modules
NOTE: To lift the printer safely and replace the optional 500-sheet tray module or 1000-sheet tray module requires
two people to stand in front (operator panel side) and behind the printer and to lift at the same time. Do not try to
lift the printer from the sides.
CAUTION: To lift the printer safely, remove the imaging drum and lift it with two people.
NOTICE: Place the imaging drum on a clean flat surface. Also, cover the imaging drum with something like
newspaper to keep it out of direct light.
Some instructions may vary depending on the tray module configuration in your printer.
1. Turn off the printer and unplug the printer power cable.
2. Remove the paper tray cover from the back of the printer.
3. Pull the printer's tray out until it stops. Hold the tray with both hands, lift the front slightly and remove it from the
printer.