Windows Xp, Windows Server 2003 - Dell 5100cn Color Laser Printer User Manual

7. Reattach the paper tray cover to the back of the printer.
8. Turn on the printer.
NOTE: The printer will automatically detect the attached tray(s) but will not detect the paper type.
9. Print a Printer Settings page to verify the optional 500-sheet tray module is installed correctly.
c. Press Menu.
d. Press until Configure appears, and then press
e. Press until Reports appears, and then press
f. Printer Settings is displayed. Press
The Printer Settings page is printed.
g. Verify 500 Sheet Tray Module is listed in the printer settings under Printer Options.
If the tray modules are not listed, turn off the printer, unplug the power cable, and reinstall the optional 500-
sheet tray module.
10. After loading paper in the installed tray, specify the paper type from the printer operator panel.
Press until the paper type for the installed tray appears, and then press
11. If you installed the optional 500-sheet tray module after installing the printer driver, update your driver by
following the instructions for each operating system. If the printer is on a network, update the driver for each
client.
When Using PCL driver
Windows XP/Windows Server 2003
1. Click Start ® Printers and Faxes.
2. Right-click this printer icon and select Properties.
3. Click the Options tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Close the Printers and Faxes folder.
Windows 2000/Windows NT 4.0
1. Click Start ® Settings ® Printers.
or .
or .
.
.