Dell 5100cn Color Laser Printer User Manual page 243

Possible range specified:
Width: 3.50 to 8.50 inches
Length: 5.50 to 14.0 inches
If this option is not specified or the tray specified tray is not available, feed paper from the default tray.
-y toner_save
Turns on the save toner mode for printing. The print result will be fainter than that of normal printing.
-y nc=n
Specifies the number of output copies (the value of copies must be a positive integer). If this option is not
specified, 1 will be selected.
-y cl
Specifies that printing be collated. If the copies option is not specified, this option will be ignored.
-y ps
The input file will be processed as the PostScript file. If the file does not begin with %!, %! will be output to
the beginning line. If a file contains %!, this option will be ignored.
-y msi
Specifies multipurpose feeder.
-y m=type
Specifies multipurpose feeder Paper Type.
Available multipurpose feeder Paper Types are as follows.
B
FinePaper/Bond/Plain Paper 2
BB
FinePaperBack/Bond/Plain Paper 2 - Side 2
P
Stationary/Plain/Plain Paper 1
PB
StationaryBack/Plain/Plain Paper 1 - Side 2
H1
ThickPaper/Heavyweight 1/Covers 1
H1B
ThickPaperBack/Heavyweight 1/Covers 1 - Side 2
H2
ThickPaper2/Heavyweight 2/Covers 2
H2B
ThickPaper2Back/Heavyweight 2/Covers 2 - Side 2
OHP
Transparency
L
LabelPaper/Labels
C1
CoatingPaper1/Coated 1/Coated Paper 1
C1B
CoatingPaper1Back/Coated 1/Coated Paper 1- Side 2
C2
CoatingPaper2/Coated 2/Coated Paper 2
C2B
CoatingPaper2Back/Coated 2/Coated Paper 2 - Side 2
E
Envelope
If this option is not specified, multipurpose feeder Paper Type for the printer can be used.
-y mfo=mode
Specifies orientation for multipurpose feeder.
Available orientations for multipurpose feeder are as follows.
le
Landscape
ler