Dell 5100cn Color Laser Printer User Manual page 266

Feed paper from the tray loaded with Monarch (3.875 × 7.5 inches).
COM10
Feed paper from the tray loaded with Envelope #10 (4.125 × 9.5 inches).
DL
Feed paper from the tray loaded with DL (110 x 220 mm).
C5
Feed paper from the tray loaded with C5 (162 x 229 mm).
LP 210x900
Feed paper from the tray loaded with LP210x900 (210 x 900 mm).
MxNmm
Feed paper from the tray loaded with MxNmm defined by users
Possible range specified:
Width: 88.9 to 215.9 mm
Length: 139.7 to 355.6 mm
MxNin
Feed paper from the tray loaded with MxNinches defined by users
Possible range specified:
Width: 3.50 to 8.50 inches
Length: 5.50 to 14.0 inches
If this option is not specified or the tray specified is not available, feed paper from the default tray.
-t
Turns on the save toner mode for printing. The print result will be fainter than that of normal printing. In some
cases, this option will be ignored.
-r
Rotates the image by 90o and uses the paper in the landscape orientation.
-n
Disables the addition of the showpage. It is used when files converted to the PostScript language program are
merged with files created with other applications.
-l=left,bottom
Specifies the print position. Printing will be executed from the left and bottom of the page. The default is 0.25
inches for both left and bottom.
-s=width,height
Specifies the output size. Printing will be executed with the width and height in inches.
-S=width
Sets the width of the output size in inches. The height will be calculated automatically according to the width.
-E
This function turns on the image enhancement function. In some cases, this option will be ignored.
-Nc=copies
Specifies the number of output copies (the value of copies must be a positive integer).
-Cl
Specifies that printing be collated. If the copies option is not specified, this option will be ignored.