Dell 5100cn Color Laser Printer User Manual page 198

CAUTION: Do not touch inside the printer with your hands. Some parts may be hot. Allow time for the
printer to cool before attempting to remove parts in this area.
Installing the New Imaging Drum
1. Remove the protective cover from the imaging drum.
CAUTION: Make sure nothing touches or scratches the surface of the light-sensitive drum surface
(green-colored roller) or the transfer roller (black-colored roller). Scratches, dirt, or oil from your
hands on the imaging drum or transfer roller may reduce the print quality.
2. Holding the imaging drum by the handle with the flat part facing the back of the printer, align the plastic guides on
both sides of the imaging drum with the slots in front of the arrows on the printer.
3. Pull the protective cover on the imaging drum straight up to remove it.
NOTICE: Do not touch the transfer roller (black-colored roller). Make sure that nothing touches or scratches the
roller surface. Scratches or oil from your hands on the roller deteriorates print quality.