Dell 5100cn Color Laser Printer User Manual page 141

Replace Toner
NNN-NNN
Replace
XXX
CRUM ID
NNN-NNN
Reseat
XXX
Toner type
NNN-NNN
Reseat
XXX
Fuser Type
010-358
Reseat
Fuser
Imaging Drum
091-912
Reseat
Imaging Drum
CTD Sensor Dirty
092-310
Clean
CTD Sensor
Close Front Door
077-300
Front Door
Is Open
Exit Tray Full
024-920
Empty Exit Tray
Load XXX
NNN-NNN
Load XXX
YYY
Load XXX
yyy
Out of Memory
016-700
The specified toner cartridge needs
to be replaced.
XXX is one of the following:
· Yellow Toner
· Cyan Toner
· Magenta Toner
· Black Toner
Error NNN-NNN relates to printer
problems.
An unsupported Toner/imaging
drum/fuser is installed.
XXX is one of the following:
· Yellow Toner
· Cyan Toner
· Magenta Toner
· Black Toner
Error NNN-NNN relates to printer
problems.
An unsupported toner is installed.
XXX is one of the following:
· Yellow Toner
· Cyan Toner
· Magenta Toner
· Black Toner
Error NNN-NNN relates to printer
problems.
An unsupported fuser is installed.
An unsupported imaging drum is
installed.
The printer's automatic density
control (CTD) sensor is dirty.
The front cover or outer front
cover is open.
Too much paper is loaded in the
center output tray.
It is beyond the limits of its
capacity.
Incorrect paper size is loaded in
the specified tray.
XXX indicates the number of the
tray or multipurpose feeder.
YYY indicates a paper size.
yyy indicates the type of paper.
Error NNN-NNN relates to printer
problems.
The printer memory is full and
cannot continue processing the
Remove the specified toner cartridge and install a new
one.
See "Replacing the Toner
NOTE: If you do not replace the toner cartridge,
print quality problems may occur. Order a new
toner cartridge at the website
(www.dell.com/supplies or
www.euro.dell.com/supplies).
See "Replacing the Toner
Replace the specified toner cartridge, imaging drum or
fuser.
See "Replacing the Toner
Imaging Drums", or "Replacing the Fuser and
Separator Roller".
Replace the specified toner cartridge.
See "Replacing the Toner
Replace the fuser. See "Replacing the Fuser and
Separator Roller".
Replace the imaging drum. See
Imaging Drums".
Clean the printer's CTD sensor.
"Cleaning the Automatic Density Control (CTD)
See
Sensor".
Close the front cover or outer front cover.
Remove paper from the center output tray.
Load the specified paper in the specified trays.
See "Loading Print Media in Standard and Optional
Trays"
· Press to clear the message, cancel the current
Cartridge"
Cartridge"
Cartridge", "Replacing the
Cartridge".
"Replacing the