Dell 5100cn Color Laser Printer User Manual page 108

Purpose:
To specify the TCP/IP settings. The change becomes effective after the printer is turned off and then on again.
Values:
IP AddressSetup AutoIP*
BOOTP
RARP
DHCP
Panel
IP Address
Subnet Mask
Gateway Address
Protocol
Purpose:
To enable or disable each item. The change becomes effective after the printer is turned off and then on again.
Values:
LPD On*
Off
Port9100 On*
Off
On*
1
IPP*
Off
On*
*1
SMB TCP/IP
Off
On*
*1
SMB NetBEUI
Off
Automatically sets the IP address.
Uses BOOTP to set the IP address.
Uses RARP to set the IP address.
Uses DHCP to set the IP address.
Enables the IP address entered on the operator panel.
Sets the IP address allocated to the printer by using the keys on the operator panel.
Sets the subnet mask.
Sets the gateway address.
Enables the LPD port.
Disables the LPD port.
Enables the Port9100 port.
Disables the Port9100 port.
Enables the IPP port.
Disables the IPP port.
Uses TCP/IP for SMB.
Does not use TCP/IP for SSB.
Uses NetBEUI for SMB.
Does not use Net BEUI for SMB.