Sending A Delayed Fax - Dell 2335dn Multifunctional Laser Printer User Manual

4.
5.
You can also use one, two, or three-digit speed dial or group dial numbers.
6. Press Select (
7. Press Select (
Or, press Scroll (
8. If you want to enter more fax numbers, repeat steps 5 and 7 . You can add up to 10 destinations.
NOTE: You cannot use more than one group dial number per broadcast operation.
9. When you finish entering fax numbers, press Start (
The document is scanned into the memory before transmission. The display shows the memory
capacity and the number of pages being stored in the memory.
For documents loaded on the document glass, the display asks if you want to load another page.
Select Yes to add. Otherwise, select No .
10. The printer begins sending the document in the order of the numbers that you have entered.

Sending a Delayed Fax

You can set your printer to store and then send a fax at a later time.
1. Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see "Loading an Original Document" .
2. Press Scroll ( or
3. Adjust the document contrast and resolution to suit your fax needs.
For details, see "Adjusting the Document Contrast" and "Adjusting the Document Resolution" .
4. Press Scroll ( or
5. Enter the number of the remote machine using the number keypad.
) to confirm the number. The display asks you to enter another fax number.
) to enter other number.
or ) to select No and then press Select (
) to highlight Fax and then press Select (
) to highlight Delay Fax to: and then press Select (
).
).
).
).