Dell 2335dn Multifunctional Laser Printer User Manual page 259

Vertical repetitive
defects
Background scatter
Misformed characters
Page skew
Curl or wave
If marks repeatedly appear on the printed side of the
page at even intervals:
The toner cartridge may be damaged. If a
repetitive mark occurs on the page, print a cleaning
sheet several times to clean the cartridge; see
"Cleaning the Drum". After the printout, if you still
have the same problems, install a new toner
cartridge. See "Replacing the Toner
Parts of the printer may have toner on them. If
the defects occur on the back of the page, the
problem will likely correct itself after a few more
pages.
The fusing assembly may be damaged. Contact
a service representative.
Background scatter results from bits of toner
distributed on the printed page.
The paper may be too damp. Try printing with a
different batch of paper. Do not open packages of
paper until necessary so that the paper does not
absorb too much moisture.
If background scatter occurs on an envelope,
change the printing layout to avoid printing over
areas that have overlapping seams on the reverse
side. Printing on seams can cause problems.
If background scatter covers the entire surface
area of a printed page, adjust the print resolution
through your software application or the printer
properties.
If characters are improperly formed and
produce hollow images, the paper stock may be too
slick. Try a different paper. See
Specifications".
If characters are improperly formed and
produce a wavy effect, the scanner unit may need
service. For service, contact a service representative.
Ensure that the paper is loaded properly.
Check the paper type and quality. See
Specifications".
Ensure that the paper or other material is
loaded correctly and the guides are not too tight or
too loose against the paper stack.
Ensure that the paper is loaded properly.
Check the paper type and quality. Both high
Cartridge".
"Paper
"Paper