Setting Up A Network-Connected Printer; Via Network Administration Programs; Via The Operator Panel - Dell 2335dn Multifunctional Laser Printer User Manual

5. Click OK .
If this is a new printer, you may be prompted to install a printer driver. If no system driver is
available, then you will need to provide a path to available drivers
6. Select whether you want this printer to be the default printer for the client, and then click Finish .
7. Print a test page to verify printer installation.
When a test page prints successfully, printer installation is complete.
To print a test page:
1. For Windows 2000, click the Start button
For Windows XP/Server 2003, click the Start button and point to Printers and Faxes .
For Windows Vista/Server 2008, click the Start button and click Control Panel
Sound Printers .
For Windows 7, click the Start button and click Control Panel
and Printers .
For Windows Server 2008 R2, click the Start button and click Control Panel
Devices and Printers .
2. Double-click your printer icon.
3. Click the File menu and point to Properties .
4. Click the General tab, and select Print Test Page .

Setting Up a Network-connected Printer

You must set up the network protocols on the printer to use it as your network printer. Protocols can be set
up by the following two methods:

1 Via Network Administration Programs

You can configure your printer's print server settings and manage it via the following programs:
Set IP Address Utility : A utility program allowing you to find your network printer and manually
configure the addresses for use with the TCP/IP protocol.
Embedded Web Service : A web server embedded to your network print server, which allows you to:
Configure the network parameters necessary for the printer to connect to various network
environments.

2 Via the Operator Panel

Settings Printer .
Hardware and Sound
Hardware and
Devices
Hardware