Dell 2335dn Multifunctional Laser Printer User Manual page 258

White Spots
Vertical lines
Gray background
Toner smear
A single sheet of paper may be defective. Try
reprinting the job.
The moisture content of the paper is uneven or
the paper has moist spots on its surface. Try a
different brand of paper. See
The paper lot is bad. The manufacturing process
can cause some areas to reject toner. Try a different
kind or brand of paper.
The toner cartridge may be defective.
repetitive defects" on the next page.
If these steps do not correct the problems,
contact a service representative.
White spots appears on the page:
The paper is too rough and a lot of dirt from a
paper falls to the inner devices within the machine, so
the transfer roller may be dirty. Clean the inside of
your machine. Contact a service representative.
The paper path may need cleaning. Contact a
service representative.
If black vertical streaks appear on the page, the
drum inside the toner cartridge has probably been
scratched. Install a new toner cartridge. See
"Replacing the Toner
If white vertical streaks appear on the page, the
surface of the LSU part inside the printer may be
dirty. Clean the LSU (see
If the amount of background shading becomes
unacceptable:
Change to lighter weight pages. See
Specifications".
Check the printer's environment; very dry (low
humidity) or high humidity (higher than 80% RH)
conditions can increase the amount of background
shading.
Remove the old toner cartridge and install a
new one. See "Replacing the Toner
Clean the inside of the printer. See
the Interior".
Check the paper type and quality. See
Specifications".
Remove the toner cartridge and install a new
one. See "Replacing the Toner
"Paper Specifications".
"Vertical
Cartridge".
"Cleaning the Interior").
"Paper
Cartridge".
"Cleaning
"Paper
Cartridge".