Selecting Country; Power Save Mode - Dell 2335dn Multifunctional Laser Printer User Manual

5.
6. Press Cancel (

Selecting Country

To change the country that appears on the operator panel, follow these steps:
1. Press Scroll ( or
2. Press Scroll ( or
3. Press Scroll ( or
4. Press Scroll ( or
5. Press Cancel (

Power Save Mode

The Power Save mode enables your printer to reduce power consumption when it is not in actual use. You
can enable this mode by selecting the duration for which the printer waits after a job is printed before it
switches to a reduced power state.
1. Press Scroll ( or
2. Press Scroll ( or
3. Press Scroll ( or
4. Press Scroll ( or
The available options are 5, 10, 15, 30, 60 and 120 (minutes).
The factory default setting is 30 minutes.
5. Press Select (
6. Press Cancel (
) to return to the Standby mode.
) to highlight Setup and then press Select (
) to highlight Machine Setup and then press Select (
) to highlight Select Country and then press Select (
) to display the country you want and then press Select (
) to return to the Standby mode.
) to highlight Setup and then press Select (
) to highlight Machine Setup and then press Select (
) to highlight Print Power Save and press Select (
) to display the time settings you want.
) to save the selection.
) to return to the Standby mode.
).
).
).
).
).
).
).