Making Copies; Setting Copy Options - Dell 2335dn Multifunctional Laser Printer User Manual

Making Copies

NOTE: A computer connection is not required for copying.
NOTE: Contaminates on the document glass may cause black spots on the printout. For best results,
clean the document glass before use. See
1. Load the document(s) face up with the top edge in first into the DADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see
2. Customize the copy settings including the number of copies, copy size, the contrast, and the image
quality by using the operator panel buttons. See
To clear the settings, use the Cancel (
3. If necessary, you can use special copy features, such as Auto Fit, Clone, Poster, and ID copying
referring to "Using Special Copy
4. Press Start ( ) to begin copying. The display shows the copy processing.
NOTE: You can cancel the copy job at any time. Press Cancel (
stop.

Setting Copy Options

The Copy menus on the operator panel let you customize all the basic copy options; number of copies, copy
size, contrast and image quality. Set the following options for the current copy job before pressing Start (
) to make copies.
NOTE: If you press Cancel (
the current copy job will be canceled and return to their default status. Or, they automatically return
to their default status after copying.
"Cleaning the scanner".
"Loading an Original
"Setting Copy
) button.
Features".
) while you set the copy options, all of the options you have set for
Document".
Options".
), and the copying will