Setting The Default Tray; Setting The Paper Feeding Flow; Setting The Paper Auto Feeding - Dell 2335dn Multifunctional Laser Printer User Manual

Dell™ 2335dn mfp user's guide
Table of Contents

Advertisement

1.
2.
Press Scroll (
or
3.
Press Scroll (
or
4.
Press Scroll (
or
5.
Press Cancel (
) to return to the Standby mode.

Setting the Default Tray

You can select the tray you want to use for printing job.
1.
Press Scroll (
or
2.
Press Scroll (
or
3.
Press Scroll (
or
4.
Press Scroll (
or
5.
Press Cancel (
) to return to the Standby mode.

Setting the paper feeding flow

1.
Press Scroll (
or
2.
Press Scroll (
or
3.
Press Scroll (
or
4.
Press Scroll (
or
Bypass Mode: When sending a print job from the computer and the MPF is filled with paper, the
printer uses the paper in the MPF first. In this mode the printer pulls the paper from MPF first
unless it is closed or empty. MPF gets the highest priority and pulls whatever media present in
the MPF. Bypass Mode is set as a default setting.
Tray Mode: When sending a print job from the computer, the printer uses paper in the tray
which you have already set in Printer properties. In this mode the MPF is treated as another
paper tray. Instead of treating MPF as first preference paper source, printer pulls paper from the
tray that matches the size and type. The first preference goes to the default source.
5.
Press Cancel (
) to return to the Standby mode.

Setting the paper auto feeding

When the paper is mismatched, the machine waits for a while (about few seconds) and starts printing
automatically even if the paper mismatches.
1.
Press Scroll (
or
2.
3.
) to highlight Tray Behaviour and then press Select (
) to highlight Substitute Tray and then press Select (
) to highlight Nearest Size and then press Select (
) to highlight Setup and then press Select (
) to highlight Tray Behaviour and then press Select (
) to highlight Default Source and then press Select (
) to find the paper tray you are using and then press Select (
) to highlight Setup and then press Select (
) to highlight Tray Behaviour and then press Select (
) to highlight Configure MPF and then press Select (
) to find the paper tray you are using and then press Select (
) to highlight Setup and then press Select (
).
).
).
).
).
).
).
).
).
).
).
).

Advertisement

Table of Contents
loading

This manual is also suitable for:

2335 mono laser2335dn mfp

Table of Contents