Dell 2335dn Multifunctional Laser Printer User Manual page 256

The printer The paper source
selects print selection in the printer
materials from properties may be
the wrong paper incorrect.
source.
A print job The job may be very
is extremely complex.
slow.
Half the The page orientation
page is blank. setting may be incorrect.
The paper size and
the paper size settings do
not match.
The printer The printer cable is
prints, but the loose or defective.
text is wrong,
garbled, or
incomplete.
The wrong printer
driver was selected.
The software
application is
malfunctioning.
The operating
system is malfunctioning.
Pages The toner cartridge
print, but are is defective or out of
blank. toner.
The file may have
blank pages.
Some parts, such as
the controller or the board,
may be defective.
The The setting in the
illustrations print software application is
incorrectly in wrong.
Adobe Illustrator.
The print The resolution of the
quality of photos photo is very low.
is not good.
Images are not
clear.
For many software applications, the
paper source selection is found under the
Paper tab within the printer properties.
Select the correct paper source. See
Tab".
Reduce the complexity of the page or
try adjusting the print quality settings.
The maximum print speed of your
printer is up to 35 PPM for Letter-sized paper.
Change the page orientation in your
application. See "Layout Tab".
Ensure that the paper size in the printer
driver settings matches the paper in the tray.
Disconnect the printer cable and
reconnect. Try a print job that you have
already printed successfully. If possible,
attach the cable and the printer to another
computer and try a print job that you know
works. Finally, try a new printer cable.
Check the application's printer selection
menu to ensure that your printer is selected.
Try printing a job from another
application.
Exit Windows and reboot the computer.
Power the printer off and then back on again.
Thoroughly shake the toner. See
"Redistributing Toner".
If necessary, replace the toner
cartridge.
Check the file to ensure that it does not
contain blank pages.
Contact a service representative.
Print the document by selecting
Download as Bitmap in the Advanced
Options window of the Graphic properties.
Reduce the photo size. If you increase
the photo size in the software application, the
resolution will be reduced.
"Paper