Dell 2335dn Multifunctional Laser Printer User Manual page 152

To enter the TCP/IP setting from your printer's operator panel, take the following steps:
1. Press Scroll ( or ) to highlight Setup and then press Select (
2. Press Scroll ( or
3. Press Scroll ( or
).
If you selected TCP/IP (IPv4) .
a. Press Scroll (
b. Press Scroll (
If you selected TCP/IP (IPv6) .
a. Press Scroll (
b. Press Scroll (
d. Press Cancel (
Static Addressing
To enter the TCP/IP address from your printer's operator panel, take the following steps:
1. Press Scroll ( or ) to highlight Setup and then press Select (
2. Press Scroll ( or
3. Press Scroll ( or
4. Press Scroll ( or
5. The first available menu item, Manual , appears and then press Select (
6. The first available menu item, Set IP Address displays.
7. Press Select (
8.
) to highlight Network Setup and then press Select (
) to select the network protocol you want to use and then press Select (
or ) to select IPv4 Activate and then press Select (
or ) to change the setting to On (enable) or Off (disable).
or ) to select IPv6 Activate and then press Select (
or ) to change the setting to On (enable) or Off (disable).
) to return to the Standby mode.
) to highlight Network Setup and then press Select (
) to highlight TCP/IP (IPv4) and then press Select (
) to highlight Set IP Address and then press Select (
) to access the IP Address menu.
).
).
).
).
).
).
).
).
).