Table of Contents
Advertisement
IF YOUR COPIER DOES NOT OPERATE AS YOU WANT
IF YOUR COPIER DOES NOT OPERATE AS
Check the following:
Copier's condition
Nothing happens
when the switch is
turned on.
f
is blinking or lit. Set a new toner bottle.
Y
is lit.
Copies have white
streaks.
Copy image density
is uneven.
Misfeeds occur fre-
quently.
26
Check the power cord. Is it properly
plugged into the outlet?
Plug it in firmly.
Is the top unit completely closed?
Close the top unit completely with both
hands.
Clear misfed paper.
Clean the corona wires.
Clean the corona wires.
Is the right kind of paper in the cassette?
Paper size and weight must be within
the minimum and maximum standards
set for this copier.
Is folded, wrinkled, damp, or curled paper
in the cassette?
Always load paper correctly.
Is the paper properly set in the cassette?
Make sure that the end plate and the
side guides are positioned properly.
See page 44.
Are there any pieces of misfed paper or
other foreign objects in the copier?
Make sure that the paper path is
completely clear of paper and other
material after a misfeed.
YOU WANT
Action
See page 31.
See page 39.
See page 59.
See page 59.
See page 70.
Advertisement
Table of Contents
