Table of Contents
Advertisement
USER TOOLS
3
Press the Image Density key
again. You will find the last 2
digits of the total copy quantity
are displayed on the copy
counter.
Example:
When the counter is 12345, "45" is
displayed on the copy counter.
At that time, the right image den-
sity indicator is lit.
When you want to see the first 2
digits again, press the Image Den-
sity key once. When you want to
see the second 2 digits, press the
Image Density key twice.
To access another user tool num-
ber, press the Image Density key.
To exit the user tools, turn off and
on the main switch.
10. Auto and manual image density level selection
If the image density is too dark or too light after using the imaging unit
for a long time, adjust it using this function.
For how to change setting,
Default: Normal (Setting: 0)
Setting
Definition
Normal
11. Deactivate Auto Shut Off Function
Your service representative can set the copier to turn Auto off mode off.
For how to change the setting,
Default: Normal (Setting: 0)
Setting
Definition
54
see page 47.
0
1
Light
0
1
On
Off
2
Dark
see page 47.
3
4
Lighter
Darker
Advertisement
Table of Contents
