Ricoh FT2012+ Operating Instructions Manual page 74

7
Push the forked end of the tool
onto the other wire (transfer co-
rona wire) as shown opposite.
Note: Be sure to insert the cleaning
tool as shown in the illustra-
tion. If you set the tool in the
wrong direction, the transfer
corona wire may be dam-
aged.
8
Move the tool right to left a few
times.
9
Take the tool out from the
transfer corona wire and put the
tool to the hole right next to the
bypass feed entrance.
A
Remove paper on the imaging
unit and reset the imaging unit.
The imaging unit is shaky if you
push it — there is no problem.
MAINTAINING YOUR COPIER
61