WHERE TO PUT YOUR COPIER
Power Connection
R WARNING: Only connect the copier to the power source de-
Make sure the plug is firmly inserted in the outlet.
Voltage must not fluctuate more than 10%.
Always turn the copier off when you have finished copying for the day.
Access To Copier
Place the copier near the power source, providing clearance as shown.
Copy tray
vi
scribed on the inside front cover of this manual.
Avoid multi-wiring as it could cause an electric
shock or a fire.
Avoid using an extension cord. Make sure the wall
outlet is near the copier and freely accessible so
that in event of an emergency it can be unplugged
easily.
Copier
More than
0 cm (0")
More than 20 cm (7.9")
More than
40 cm (15.8")
More than 20 cm (7.9")