Use And Storage Of Supplies; Copy Paper - Ricoh FT2012+ Operating Instructions Manual

Copy Paper

Copy paper of the types or in the conditions listed below are not recom-
mended for this copier.
Folded, curled, creased, or damaged paper
Torn paper
Damp paper
Perforated paper
Paper with conductive or low electrical resistance such as carbon or
sliver coated paper.
Wavy paper
Thermal paper, art paper
Thin paper that has low stiffness
Adhesive labels should be fed from the bypass feed entrance one sheet at a
time.
Translucent paper should be fed from the bypass feed entrance.
Translucent paper should be fed so that the paper grain is oriented with the
paper path.
Do not touch copy paper if your fingers are wet or oily; finger prints may
appear on the copy.

USE AND STORAGE OF SUPPLIES

USE AND STORAGE OF SUPPLIES

67