Table of Contents
Advertisement
DO'S AND DON'TS
If you make copies continuously under high temperature, the copier stops
copying for a while — there is no problem.
When you replace the imaging unit
and close the top unit, push the
top of the copier with both hands
as shown in the illustration.
While copying, do not turn off the main switch.
While copying, do not open the top unit.
While copying, do not lift the platen cover.
While copying, do not unplug the power cord.
Do not lay anything weighing more than 10 kg, 22 lb on the exposure glass.
Do not place tools or other hard objects on the exposure glass.
Do not allow paper clips, staples, or other small metallic objects to fall inside
the machine.
Always turn the copier off when you have finished copying.
When adding toner
Before setting the new toner bottle, shake it well, at least 5 or 6 times.
Do not remove the toner bottle before the Add Toner f indicator is on —,
toner could spill out.
Do not store toner where it will be exposed to heat.
Do not eat or swallow toner, and keep it out of reach of children.
When removing misfed paper
Do not leave any torn scraps within the copier.
After clearing misfeeds, make sure that all units are returned to their original
positions and all covers are closed.
Do not touch the copy image when removing misfed paper — toner may
stain your hands.
66
Advertisement
Table of Contents
