Table of Contents
Advertisement
USER TOOLS
5
Press the Image Density key.
You will find the user tool's number
is lit and the dot blinks.
How To Change Adjustment Value Or Modes
1
Access the user tool you want
to adjust (
user tool's number will be lit in
the copy counter.
2
Enter the required setting using
the Up (+) and Down (-) keys.
For the settings, refer to pages 49
to 54.
3
Press the Image Density key.
The setting will be stored in mem-
ory.
You will find the setting number
blinks and the point indicator is lit.
Now, you can access another user
tool's number.
4
To exit user tools, turn the main
switch off and then back on
again.
48
See page 47). The
Advertisement
Table of Contents
