Is Lit Or Blinking: Add Toner - Ricoh FT2012+ Operating Instructions Manual

When the Add Toner f indicator blinks, it is time to supply toner
(copying is still possible). When the Add Toner f indicator is continu-
ously on, copies cannot be made until the toner bottle is replaced.
R
WARNING:
Note:
When you change the toner bottle, be careful not to touch
the blue material (OPC).
Note: Before setting the new toner bottle, shake it well at least 5 or 6
times.
Note: Do not remove the toner bottle before the Add Toner f indica-
tor comes on — toner could spill out.
1
Open the new toner bottle box
and take out the bottle.
2
Shake the new bottle well at
least 5 to 6 times.
f IS LIT OR BLINKING: ADD TONER
Do not incinerate used toner or toner containers.
Toner dust might ignite when exposed to an open
flame.
Dispose of the used toner containers according to
local regulations for plastics.
f IS LIT OR BLINKING: ADD TONER
31