Table of Contents
Advertisement
The installation location should be carefully chosen because environ-
mental conditions greatly affect the performance of a copier.
Copier Environment
Optimum Environmental Conditions
Temperature: 10 - 30 C, 50 - 86 F
Humidity: 15 - 90%
Place upon a strong, stable, level base with a flat, even surface. Do not
place on a surface that has holes, ruts, cavities or is uneven in any way.
The copier must be level within 3 mm, 0.11" both front to rear and left to
right.
To avoid a possible build-up of ozone, make sure to locate this copier in a
large well ventilated room that has air turnover of more than 30 m
Environments To Avoid
Locations exposed to direct sunlight or strong light (more than 1,500 lux.)
Locations directly exposed to cool air from an air conditioner or heated air
from a heater. (Sudden temperature changes might cause condensation
within the copier.)
Places where the copier might be subjected to frequent strong vibration.
Dusty areas.
Areas with corrosive gases.
Places higher than 2,000 m, 6,500 ft above sea level.
WHERE TO PUT YOUR COPIER
WHERE TO PUT YOUR COPIER
/hr/person.
3
v
Advertisement
Table of Contents
