REDUCED AND ENLARGED COPYING
REDUCED AND ENLARGED COPYING
Note: This function can be used only when you have a Type 2 cop-
ier.
Reducing And Enlarging Using Preset Ratios
(Preset R/E)
1
Place the original face down on
the exposure glass, and lower
the platen cover.
The original should be centered to
the arrow mark on the scale.
2
Press the Reduce/Enlarge key
to reduce or increase the repro-
duction ratio. The reduction ra-
tio will change as follows:
93%
100%
3
Enter any other settings and
make your copies.
22
82%
71%
141%
122%