Table of Contents
Advertisement
4
Set the end plate to the paper
size you want to use.
If you are changing to 8
14", put the end plate in the
hole of the cassette.
If you use only 8
14" paper, do not follow steps 5
and 6.
5
While pushing the bottom plate
down, pull up the two side
guides as shown in the illustra-
tion.
6
While pushing the bottom plate
down, set the two side guides
to the paper size you want to
use.
Be sure to set both side guides to
the
proper
there might be a misfeed.
1/2
" x 11" or 8
1/2
1/2
position.
Otherwise,
CHANGING THE PAPER SIZE
" x
" x
45
Advertisement
Table of Contents
