Ricoh FT2012+ Operating Instructions Manual page 73

MAINTAINING YOUR COPIER
3
Insert the square end of the tool
between the wire (charge co-
rona wire) as shown opposite.
Note: Be sure to insert the cleaning
tool as shown in the illustra-
tion. If you set the tool in the
wrong direction, the charge
corona wire may be dam-
aged.
4
Move the tool right to left a few
times and take it out.
5
Remove the imaging unit and
put it on spread out paper.
The paper should be spread out on
an even base.
6
Cover the blue material (OPC)
with paper not to expose it to
the light.
60