Printing/Copying On Labels; Guidelines; Procedure; Printing/Copying On Glossy Paper - Xerox Color 550 User Manual

Printing

Printing/Copying on Labels

Labels can be printed from Trays 1, 2, 3, 4, and 5 (Bypass Tray).
To order paper or specialty media, contact your local reseller or go to the Xerox Supplies
website at www.xerox.com/office/550_560_570DCPsupplies.

Guidelines

Rotate stock frequently. Long periods of storage in extreme conditions can cause
labels to curl and jam in the printer.
Use labels designed for laser printing.
Do not use vinyl labels.
Do not use dry gum labels.
Print only on one side of the sheet of labels.
Do not use any sheet where labels are missing; it may damage the printer.
Store unused labels flat in their original packaging. Leave the sheets of labels inside
the original packaging until ready to use. Return any unused sheets of labels to the
original packaging and reseal it.
Do not store labels in extremely dry or humid conditions or extremely hot or cold
conditions. Storing them in extreme conditions may cause print quality problems or
cause them to jam in the printer.

Procedure

1. Load labels in the desired tray.
2. In the printer driver, do one of the following:
- Select Labels as the paper type.
- Select the tray containing the labels as the paper source.

Printing/Copying on Glossy Paper

Glossy paper can be printed from Tray 1, 2, 3, 4, and 5 (Bypass Tray).
To order paper or specialty media, contact your local reseller or go to the Xerox Supplies
website for your printer: www.xerox.com/office/550_560_570DCPsupplies.
6-4 Xerox Color 550/560/570 Printer
®
User Guide