Printing Glossy Paper - Xerox 7760DN - Phaser Color Laser Printer User Manual

Printing Glossy Paper

Glossy paper can be printed from any tray within the following weight range:
■ Thin Glossy Paper: 120–169 g/m
■ Thick Glossy Paper: 170–220 g/m
Note:
Glossy paper should be printed on one side only.
To order paper, transparencies, or other specialty media, contact your local reseller or go to
www.xerox.com/office/supplies.
Guidelines
■ Do not open sealed packages of glossy paper until you are ready to load them into the
printer.
■ Leave glossy paper in the original wrapper, and leave the packages in the shipping carton
until ready to use.
■ Remove all other paper from the tray before loading glossy paper.
■ Load only the amount of glossy paper you are planning to use. Do not leave glossy paper
in the tray when you are finished printing. Reinsert unused glossy paper in the original
wrapper and seal.
■ Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy
paper to curl and jam the printer.
2
(50–60 lb. Cover)
2
(65–80 lb. Cover)
Phaser® 7760 Color Laser Printer
3-40
Printing on Specialty Media