Load Paper; Load Paper In Trays 1 And 2 - Xerox 4590 User Manual

2. P a p er an d o th e r m e di a

Load paper

Load paper in trays 1 and 2

2- 6
NOTE: When the machine runs out of paper during printing, a
message is displayed on the Printer UI. Add paper according
to the displayed instructions. Printing automatically resumes
when paper is added.
1. Pull out the tray towards you until it stops.
When pulling out the paper tray, do it slowly. If
WARNING:
pulled out with too much force, the tray can hit and injure your
knees.
Load and align the edge of the paper against the left edge of
2.
the tray with the side to be copied or printed on facing up.
KEY POINT: Do not load paper exceeding the maximum fill line.
Doing so might cause paper jams or machine trouble.
If you changed the paper type and/or weight, enter this in the
3.
Paper Tray Attributes window on the machine user interface.
Select [OK] to save the information and close the window.
Push the tray in gently until it comes to a stop.
4.
X e r o x 4 5 90 E P S /4 11 0 E P S Us e r G ui d e