Overwriting the hard disk (optional)
X er o x 4 5 90 EP S / 4110 EP S Us e r G ui d e
From the Machine Status screen, select Paper Tray.
1.
When finished examining the tray configurations, select
2.
Close.
You can check whether the hard disk is being overwritten. When
"Standby" appears, the overwriting operation has finished.
NOTE: An optional package is necessary for this selection. For
more information, contact the Customer Support Center.
KEY POINT: Overwrite Hard Disk only appears when Overwrite
Hard Disk is set in the System Settings. For more information,
refer to "Overwrite Hard Disk" in the System Administration Guide.
From the Machine Status screen, select Overwrite Hard
1.
Disk.
When finished examining the status, select Close.
2.
4. M ac h i n e s tat u s
4-5