Change The Size In The Optional Trays 6 And 7 (Hcf) - Xerox 4590 User Manual

2. P a p er an d o th e r m e di a

Change the size in the optional Trays 6 and 7 (HCF)

2- 1 8
NOTE: When changing the paper size to non-standard size
loaded in trays 6 and 7, contact your Customer Support
Center. If doing so, it never returns to the original setting.
1. Pull out the tray towards you until it stops.
When pulling out the paper tray, do it slowly. If
WARNING:
pulled out with too much force, the tray can hit and injure your
knees.
Remove any paper loaded on the tray.
2.
Loose the screw on the right to remove your side and the other
3.
side guide.
Attach the guides according to the hole of the paper size to
4.
change, and tighten the screws.
X e r o x 4 5 90 E P S /4 11 0 E P S Us e r G ui d e